Uzisombulula njani izixhobo kunye neengxaki zobugcisa ekuhlangatyezwane nazo xa unitha iphedi kumatshini wokunitha onesetyhula omnye weJersey?

1.Umsonto osetyenziselwa ukunitha okudadayo ungqindilili.Kucetyiswa ukuba usebenzise isikhokelo somsonto we-18-guage/25.4 mm.Ifidi yomsonto yesikhokelo somsonto sisondele kakhulu kwinaliti kangangoko.

2.Iigiya ezikwibhokisi yegiya yokutyisa umsonto wentloko yomatshini kufuneka zitshintshwe phambi kokunitha, ukuze i-weave yomhlaba kunye nomsonto odadayo ube nomlinganiselo othile wokutyisa.Umlinganiselo wosulelo jikelele umi ngolu hlobo lulandelayo: ukondla imisonto ye-weave ngamazinyo angama-43 anamazinyo angama-50;Ukutyisa imisonto edadayo ngamazinyo angama-26 anamazinyo angama-65.

3.Ekuqaleni kokunitha, amandla athile okutsala kufuneka anikwe kwilaphu elimpunga ukuba athathe ithuba lee-loops ezisanda kwakhiwa ukukhulula.

4.Xa i-sinker iqhubela phambili kakhulu, impumlo ye-sinker kufuneka isondele ngokusemandleni kwinqanaba eliphezulu lenaliti yokunitha ukuze kuqinisekiswe ukuba impumlo ye-sinker ingakwazi ukulawula i-loops endala ukuze bakwazi ukukhulula kakuhle.

5.Ubude bomsonto owenza intambo edadayo abufanele bube bubude kakhulu, kungenjalo kulula ukuvelisa izititshi.Ngokuqhelekileyo, kufuneka ibe ngaphantsi okanye ilingane ne-7cm.

I-6.I-tension kunye ne-winding tension kufuneka ibe yimodareyitha, i-tension incinci, ilaphu elimpunga lilula ukuvelisa imivimbo ethe tye;i-tension inkulu, ilaphu elingwevu kulula ukuvelisa imingxuma.

I-7.Ijubane lokunitha lomatshini ngokuqhelekileyo li-18-20r / min kwizinto eziluhlaza, kunye ne-22-24r / min kwizixhobo ezingcono ezisemgangathweni.

8.Ukuba kukho isiphene somgca oxwesileyo, ukunyanzeliswa kokunitha komsonto ophantsi kunokuba kuncinci, kulawulwa ngokubanzi kwi-1.96 ~ 2.95 cN (2~3g).